Racers have been using ceramic coatings for many years now but no one has made a polish for these parts until now. A new product has been released that is made specifically for ceramic coated parts in high heat applications.

CERMA-GLOW™ is a polish made specifically for your ceramic coated headers and other ceramic coated parts.

CERMA-GLOW™ is a Ceramic Coating specific polish, to enrich and protect the shine on Polished Metallic Ceramic Coated parts and works extremely well of heavily oxidized Metallic Ceramic Coated parts, where normal polishes show poor results.

The polish is made specifically for high heat applications like headers and exhausts were regular waxes and polishes dull.

The product also works good for ceramic coated wheels and other parts that are not subject to heat. The polish creates a very shiny appearance and is also good for protecting from typical road grime and buildup of dirt.

Ceramic coatings can be sanded and buffed to a smooth shiny appearance just like paint. The aluminum wheel above was sandblasted then coated with Tech Line ceramic coatings then sanded with 1500 and 2000 grit wet paper using water. The wheels were then buffed with a machine to a very bright finish.

The CERMA-GLOW™ polish is used to maintain the appearance of your ceramic coated parts with easy application..

Product is available from Tech Line Coatings.

 

 

Tech Line Coatings suppliers of, Dry Film lubricants, Thermal barrier coatings, Thermal Dispersants, Corrosion & Chemical Resistant coatings.